Project Description

1.Brief Introduction

HPMC-Hydroxypropyl Methyl Cellulose and Methyl Hydroxyethyl Cellulose and non-ionic cellulose ether made by natural high polymer cellulose as raw material and series of chemical processing. They are odorless, tasteless and non-toxic white powder, which can be dissolved in cold water to form a transparent viscous solution. Processing thickening, binding, dispersing, emulsifying, film, coating, suspending, absorbing, gelling, surface activity, water maintaining and protective colloid properties.

Gold quality of HPMC for Ceramic Extrusion Molding


ItemsTechnical dataUnits
AppearanceWhite or off-white powder
Viscosity range (2%,Brookfield)4000 – 75000mPa.S
Viscosity range (1%, NDJ)4000-about210000mPa.S
PH Value7-9
Gel temperature60-75%
Packing Density350 – 450g/l

3.HPMC for Ceramic Extrusion Molding:

HPMC for Ceramic Extrusion Molding instructions: Extruded products are used for external walls, partitions, roofs and acoustic walls of buildings and are made from a mixture of cement, reinforcing fibres, aggregates, fibrous ethers and water.
The mixture is kneaded, then vacuum extruded and moulded into a vacuum or solid product and finally matured in a hot press.
The product is lightweight, strong, long-lasting, waterproof and easy to work with. With the addition of cellulose ether, it is possible to The result is a clay-like substance with a high degree of water retention, which is suitable for extrusion.

For binder in construction of ceramic facing material .
Because this product can improve water retention, plasticity and easy to plaster, in the use of cement mortar or ash mixed with cellulose ether products
The direct press-stick method is adopted in the construction of slurry, which not only greatly improves the working efficiency, but also has higher sticking strength than the traditional cement sand (ash) pulp.

HPMC for Ceramic Extrusion Molding